Golden Mile locks in January drilling for Arizona gold target

Golden Mile Resources has secured a US drilling contractor for a 10-hole maiden programme at its Aurora gold prospect in Arizona. Mobilisation is planned for early January 2027, but remains conditional on final permits and approvals.

  • Experienced US drilling contractor secured
  • Ten reverse circulation holes planned to approximately 120 metres
  • Early January 2027 mobilisation remains subject to permitting
  • Surface anomaly interpreted as at least 280 metres wide and 450 metres long
  • No drilling constraints identified in completed cultural heritage and environmental surveys
An image related to Golden Mile Resources Ltd A photo of the logo for Golden Mile Resources Add us as a preferred source on Google
Image © middle. Logo © respective owner.

Aurora drilling contractor secured ahead of January mobilisation

Golden Mile Resources Ltd (ASX:G88) has moved its Aurora gold prospect from surface exploration to its first subsurface test, securing an experienced drilling contractor for a 10-hole reverse circulation programme in Arizona. Mobilisation is scheduled for early January 2027, although the timetable still depends on final permits and approvals.

Aurora Gold Prospect proximal to large producing and developing copper and gold projects
Caption and image © Golden Mile Resources Ltd. From “Aurora Gold Prospect Drill Programme Scheduled”, 16 Nov 2026.
Shows the proposed drill section and surface sampling results to be tested at depth
Caption and image © Golden Mile Resources Ltd. From “Aurora Gold Prospect Drill Programme Scheduled”, 16 Nov 2026.
Caption and image © Golden Mile Resources Ltd. From “Aurora Gold Prospect Drill Programme Scheduled”, 16 Nov 2026.

The programme will drill holes to a maximum depth of approximately 120 metres, angled at 60 degrees to test whether the broad gold anomalies identified at surface continue at depth. Nine holes are planned across the central part of the prospect, with a further hole designed to test mineralisation beneath the Cloudburst Volcanics cover.

Surface sampling has outlined a wide but undrilled anomaly

Aurora has been defined through a series of rock-chip and surface-line sampling campaigns. The latest interpretation places the exposed mineralised zone at least 280 metres across and 450 metres along strike, with the southern and eastern boundaries still open. Earlier work included averages of 2.38 grams per tonne gold across about 126 metres on one line and 2.56 grams per tonne across about 55 metres on another.

Aurora Prospect showing sub-outcrop and sample line
Caption and image © Golden Mile Resources Ltd. From “Aurora Gold Prospect Drill Programme Scheduled”, 16 Nov 2026.
Aurora Prospect showing geology and interpreted boundaries to mineralisation
Caption and image © Golden Mile Resources Ltd. From “Aurora Gold Prospect Drill Programme Scheduled”, 16 Nov 2026.
Caption and image © Golden Mile Resources Ltd. From “Aurora Gold Prospect Drill Programme Scheduled”, 16 Nov 2026.

The company’s expanded Aurora gold target had previously been described as an early-stage, undrilled target with open boundaries. Golden Mile now says the sampling supports a bulk-tonnage exploration concept in which gold occurs not only in quartz veins but also within the altered granite host, either disseminated or associated with microfractures.

Permitting remains the immediate condition to drilling

Cultural heritage and environmental surveys over the proposed drill areas have been completed, with the company’s specialist consultant identifying no constraints to drilling. The permit application with Arizona land authorities is at an advanced stage, while engagement with state and federal agencies continues.

Rock chip and surface line sample results
Caption and image © Golden Mile Resources Ltd. From “Aurora Gold Prospect Drill Programme Scheduled”, 16 Nov 2026.

The planned holes will test roughly 250 metres across strike and 300 metres along strike. That should provide the first direct evidence of the anomaly’s vertical geometry and continuity, but it will not by itself establish a mineral resource. The company has not released drilling results, an economic study, a resource estimate or programme cost guidance.

The next test is continuity, not confirmation of a resource

Chairman Grant Button said securing a contractor in a tight US drilling market was an important step and described the upcoming campaign as a milestone in assessing Aurora’s potential to host a significant gold resource. Those claims remain forward-looking: drilling has not started, and the project’s bulk-tonnage character is an exploration interpretation based on surface results.

Aurora Prospect showing geology, interpreted boundaries to mineralisation and proposed drill holes
Caption and image © Golden Mile Resources Ltd. From “Aurora Gold Prospect Drill Programme Scheduled”, 16 Nov 2026.

The company’s maiden drilling plan was already progressing through permitting and contractor tendering in late October. The immediate catalysts are now tangible: final approvals, mobilisation, completion of the 10 holes and the assays that will show whether the surface anomaly survives below ground.

Get ASX:G88 news the moment it breaks

Instant push notifications No waitlist Free
Download on the App Store iPhone & iPad
Get it on Google Play Android
Email alerts

Bottom Line?

Aurora has reached the point where surface grades must translate into drill intersections, with permitting and January mobilisation still standing between the target and its first subsurface evidence.

Questions in the middle?

  • Will final permits arrive in time for the planned early January mobilisation?
  • Do the 10 holes confirm continuous mineralisation at depth across the interpreted footprint?
  • If drilling returns encouraging intersections, will Golden Mile have the funding and capacity to expand the programme?

Sources

1