Home › Mining › Locksley Resources (ASX:LKY)

Locksley finds more copper grade and scale at Greater Tottenham

Mining By Maxwell Dee 6 min read

Locksley Resources has lifted the reported copper grade and contained metal at its Greater Tottenham project, with the updated resource now containing 110,000 tonnes of copper and 100,000 ounces of gold. A much larger Exploration Target points to possible scale, but remains conceptual until drilling proves it.

  • 10 Mt at 1.10% copper and 0.32 g/t gold
  • 110,000 tonnes of contained copper and 100,000 ounces of gold
  • Conceptual Exploration Target of 26-53 Mt
  • Iron Duke drilling to test resource extensions and new targets
  • Higher-grade comparison partly reflects revised cut-offs and pit constraints

Greater Tottenham resource reaches 110,000 tonnes of copper

Locksley Resources (ASX:LKY) has put a substantially higher-grade number on its Greater Tottenham copper-gold project in central New South Wales. An independent JORC 2012 estimate by ERM Australia Consultants puts the combined resource at 10 million tonnes grading 1.10% copper and 0.32 grams per tonne gold, containing 110,000 tonnes of copper and 100,000 ounces of gold.

“Iron Duke 1 3 1.00 1.22 0.56 0.65.”Caption and image © Locksley Resources Limited. From “Greater Tottenham Resource Grows to 110kt Cu and 100koz Au”, 16 Nov 2026.
“Figure A8: Mt Royal block model >0.4Cu cut off, 3D view looking north-east with RPEEE pit shell (blue).”Caption and image © Locksley Resources Limited. From “Greater Tottenham Resource Grows to 110kt Cu and 100koz Au”, 16 Nov 2026.

The estimate combines Mt Royal, Carolina and Iron Duke for the first time. About 7.9 million tonnes, or roughly 80% of the total, falls within optimised open-pit shells at an average grade of 1.05% copper and 0.30 grams per tonne gold. The remainder is higher-grade material below those shells at Mt Royal and Carolina, reported as having potential for underground mining but without detailed underground mine shapes or methods.

Carolina leads the project on copper grade

Carolina is the standout deposit by grade, with 2.4 million tonnes at 1.22% copper and 0.38 grams per tonne gold inside the open-pit shell. Its underground component adds a further 1.2 million tonnes at 1.55% copper, although that material is entirely Inferred and has not been tested against a detailed underground mining plan.

“Figure A14: Carolina Grade Tonnage curve (Indicated + Inferred, RPEEE open pit constrained).”Caption and image © Locksley Resources Limited. From “Greater Tottenham Resource Grows to 110kt Cu and 100koz Au”, 16 Nov 2026.
Image © Locksley Resources Limited. From “Greater Tottenham Resource Grows to 110kt Cu and 100koz Au”, 16 Nov 2026.

For the company’s wholly owned Mt Royal and Carolina deposits, the updated estimate compares with the 2022 resource of 9.86 million tonnes at 0.70% copper and 71,000 tonnes of contained copper. Locksley reports a 56% increase in copper grade and a 37% increase in contained copper, but the comparison needs care: the earlier estimate used a 0.3% copper cut-off without an optimised pit shell, while the new estimate uses 0.4% within pit shells and 0.7% below them. On a like-for-like basis using a 0.3% cut-off and no pit constraint, ERM reports a 2026 model of 12.5 million tonnes at 0.91% copper, containing 113,000 tonnes of copper.

Exploration Target offers scale without resource status

The update gives substance to Locksley’s district-scale copper strategy, which had redirected exploration effort towards New South Wales. ERM has outlined an additional Exploration Target of 26 million to 53 million tonnes grading between 0.95% and 1.16% copper and 0.24 to 0.31 grams per tonne gold. That range represents approximately 250,000 to 610,000 tonnes of copper and 200,000 to 530,000 ounces of gold, separate from the reported resource.

“Figure A17: Mt Royal Exploration Target volume (3D view looking north east).”Caption and image © Locksley Resources Limited. From “Greater Tottenham Resource Grows to 110kt Cu and 100koz Au”, 16 Nov 2026.
Image © Locksley Resources Limited. From “Greater Tottenham Resource Grows to 110kt Cu and 100koz Au”, 16 Nov 2026.

It is also the most speculative part of the announcement. The target is based on extensions of known lodes along strike and down dip, supported by historical drilling and geophysical work, but the company explicitly says there has been insufficient exploration to estimate a Mineral Resource and that further drilling may not result in one. The largest component sits around Mt Royal, while Carolina carries the highest target grade range and Iron Duke the smallest target.

Iron Duke drilling creates the next test

A drill rig and crew have arrived at Iron Duke, where the first approved programme covers 28 pads and approximately 5,500 metres. Phase one diamond drilling is expected to start this week, subject to operational conditions, targeting a 100 to 150 metre southern gap, infill and down-dip extensions, northern extensions and an undrilled eastern induced-polarisation anomaly.

“Locksley’s Greater Tottenham Project tenement position”Caption and image © Locksley Resources Limited. From “Greater Tottenham Resource Grows to 110kt Cu and 100koz Au”, 16 Nov 2026.

The programme matters because Iron Duke is the project’s most gold-rich deposit at 0.61 grams per tonne, but its 1.1 million tonne resource is Inferred only and the deposit is held under an option rather than current ownership by Locksley. The wider drilling plan could run for about 18 months, subject to approvals, land access, rig availability, funding and results. Metallurgical testwork has not yet been completed, while the company also flags uncertainty around historical mining depletion and says more work is required to upgrade confidence in parts of the model.

Bottom Line?

The resource update improves the geological case for Greater Tottenham; Iron Duke drilling and future metallurgical work now have to convert conceptual scale into evidence that can support mine and processing studies.

Questions in the middle?

  • Will Iron Duke drilling confirm extensions beyond the Inferred resource and strengthen the case for exercising the project option?
  • How much of the 26-53 million tonne Exploration Target can be converted into a JORC Mineral Resource?
  • What recoveries and processing pathway will metallurgical testwork support across oxide, transitional and fresh material?

Sources