Azzuro Resources has extended the Red Hill massive sulphide system by about 140 metres along strike and 50 metres at depth, prompting an expanded 4,000-metre drilling campaign. The latest intersections are based on visual logging, with laboratory assays still pending.
- North Zone extended approximately 140m along strike
- Central Zone sulphide system extended 50m deeper
- Planned drilling increased to approximately 4,000m
- 15.7m visually logged massive sulphide interval in MU2636
- Assays and metallurgical results remain pending
Red Hill sulphide system extends beyond previous drilling
Azzuro Resources PLC (ASX:AZ9) has expanded its Red Hill copper-gold drilling program after visual logging pointed to a wider massive sulphide system in southwestern Mongolia. Step-out holes have extended the North Zone by approximately 140 metres along strike, while drilling at the Central Zone pushed the deeper sulphide system another 50 metres down.
The most prominent new interval came from MU2636, which intersected 15.7 metres of visually logged massive sulphide from 38.8 metres downhole. The same hole also encountered a deeper banded sulphide package between roughly 130 metres and 146 metres, including several intervals with visually logged chalcopyrite. MU2621 intersected all three known mineralised lenses and extended the deeper system, while MU2618 and MU2622 added western extensions to the North Zone.
These results build on the previously reported 550-metre Red Hill mineralisation trend and its 150-metre depth extent, which had been identified in earlier drilling. The latest announcement now takes the overall planned program to approximately 4,000 metres across Red Hill and the Oval copper-nickel project, from an initial 1,200-metre plan.
Visual sulphide observations are not assay results
The geological signs are encouraging, but the qualification is material: Azzuro has reported no assay results from the current drilling campaign. The sulphide percentages and interval descriptions are visual estimates from drill-core logging, and the reported lengths are downhole measurements rather than true widths.
At Red Hill, 2,364.1 metres had been drilled across 27 holes, including two abandoned holes, with the current campaign focused partly on shallow gold mineralisation above and around the main VMS system. Further assay batches are expected through the fourth quarter of 2026, subject to laboratory turnaround. Metallurgical testing of copper sulphide mineralisation is expected in the fourth quarter or the first quarter of 2027.
Surface sampling adds a shallow gold target
Separate reconnaissance sampling returned gold of up to 4.69 grams per tonne from 43 rock-chip samples, with 11 samples at or above 1.0 grams per tonne. Copper reached 1.37% in the sampling set. Those numbers come from spot samples collected in silicified and quartz-breccia zones, however, and the company cautions they may not represent the grade or continuity of mineralisation in the ground.
Drilling of the shallow oxidation cap at the North and Central zones is nearing completion. Azzuro says the rig is expected to finish at Red Hill within one to two weeks before moving to Oval, where two or three targets are planned for testing. The company has said the program is funded by its recent A$3.06 million Kerry placement, which gave Kerry Resources Logistics an approximately 19.9% stake.
DHEM targets still need geological resolution
Down-hole electromagnetic modelling is continuing across several holes, including MU2621 and MU2636. MU2621 validated the Zone B conductor with a massive sulphide intersection, while MU2636 did not encounter mineralisation in the expected position relative to the MU2619 conductor. Azzuro is investigating why the sulphides appear shallower and further north than predicted, leaving the geometry of the system unresolved.
That uncertainty is likely to shape the next round of drilling. The company plans to test further lateral and depth extensions using DHEM conductors and gravity anomalies, but the exploration results remain too early to support a mineral resource estimate. The next decisive evidence will come from assays, followed by the metallurgical work needed to establish how the sulphide mineralisation behaves in processing tests.
Bottom Line?
The exploration footprint is expanding, but the investment case still turns on whether the visually logged sulphides convert into meaningful assay grades and true widths.
Questions in the middle?
- Will laboratory assays confirm copper and gold grades across the newly extended sulphide zones?
- How will Azzuro resolve the mismatch between the MU2619 conductor and the shallower mineralisation in MU2636?
- Can the expanded Red Hill program deliver enough geological continuity to support a future Mineral Resource estimate?