Brazilian Rare Earths has reported exceptional near-surface rare earth grades across a new 2.5 km corridor at Pelé South in Bahia, including 6 metres at 13.2% TREO and 14.3 metres at 11.2%. Diamond drilling is now testing whether the shallow mineralisation sits above a larger hard-rock system.
- 6 m at 13.2% TREO from surface, including 4 m at 16.6%
- 14.3 m at 11.2% TREO from surface in the northern target
- 30 significant Pelé South intervals average 5.0% TREO
- Two additional eastern corridors expand the target area
- Diamond drilling is testing grade, geometry and bedrock continuity
Pelé South delivers exceptional shallow grades
Brazilian Rare Earths Limited (ASX:BRE) has uncovered one of the most striking exploration results in its Rocha da Rocha province, with auger drilling identifying high-grade rare earth mineralisation across a corridor exceeding 2.5 kilometres at Pelé South in Bahia, Brazil. The standout result was 6 metres at 13.2% total rare earth oxides (TREO) from surface, including 4 metres at 16.6% TREO from 2 metres.
Other results were similarly substantial for shallow drilling: 12 metres at 10.0% TREO from surface, 6 metres at 11.4% from 3 metres, 8.5 metres at 8.6% from 2 metres and 7 metres at 8.6% from surface. Several holes ended in mineralisation at mechanical refusal, meaning the auger programme has not yet established how far the zones continue into fresh rock.
Northern extension adds a second high-grade zone
The northern part of the Pelé corridor has produced a separate 14.3-metre intersection at 11.2% TREO from surface in diamond hole TG5DD0004, with a 1.2-metre section grading 13.8%. A second diamond hole returned 7.8 metres at 10.6% TREO. The company said magnet rare earth grades in this zone reached 31,802 parts per million NdPr and 1,694 parts per million DyTb.
The result adds to the company’s growing high-grade portfolio. BRE’s Monte Alto resource expansion had lifted that project’s Indicated resource by 41% to 3.54 million tonnes at 10.71% TREO. Pelé, however, remains an exploration discovery rather than a defined Mineral Resource.
Grades compare favourably with Monte Alto
Across 30 significant Pelé South auger intervals totalling 207 metres, the length-weighted average grade was 5.0% TREO. BRE compares that with 2.3% for comparable auger intercepts in the Monte Alto Mineral Resource dataset, although the company stresses that these are averages of selected intercepts above 1% TREO, not average deposit grades.
Pelé South also showed stronger scandium enrichment in the company’s comparison, averaging 203 parts per million Sc2O3 across reported intervals above 1% TREO, versus 30 parts per million at Monte Alto. Selected holes also contained dysprosium, terbium, gadolinium and yttrium, elements the company identifies as relevant to high-performance permanent magnets and other critical-mineral applications.
Diamond drilling becomes the key test
BRE is now running diamond drilling beneath the strongest radiometric anomalies and the highest-grade auger zones. The immediate question is whether Pelé’s shallow, weathered mineralisation is a surface expression of a continuous primary hard-rock source, and whether that source has the grade and geometry needed to support future resource work.
The exploration campaign has so far included 224 newly reported auger holes covering about 2,458 metres, alongside seven new diamond holes. Assays remain outstanding for 44 auger holes covering 379 metres. Further infill and step-out drilling will seek to define the saprolite footprint, while work on the eastern geophysical corridors will test whether Pelé is a single trend or a wider multi-corridor district.
That distinction matters. The high grades are already compelling as exploration results, but continuity, true thickness in bedrock, mineralogy, processing response and development economics have not yet been established. The next diamond assays will determine whether Pelé is merely an impressive surface discovery or a credible second high-grade feed source for BRE’s planned Rocha da Rocha hub-and-spoke strategy.
Bottom Line?
Pelé has delivered unusually strong near-surface grades, but the investment case now turns on diamond drilling, continuity and the eventual conversion of exploration results into a Mineral Resource.
Questions in the middle?
- Will diamond drilling confirm a continuous high-grade bedrock source beneath the shallow Pelé mineralisation?
- How much of the 2.5 km corridor will survive infill drilling as a coherent, potentially mineable zone?
- Can Pelé’s mineralogy and processing response support integration with the planned Rocha da Rocha development hub?