Marimaca’s Pampa Medina drilling reveals a broader copper-silver system
Marimaca Copper has reported thick, high-grade copper-silver intersections at Pampa Medina, including 102 metres at 1.00% copper and 8 metres at 3.21% copper. The results support continuity across the central zone as drilling moves towards a maiden resource estimate and new northern and western targets.
- 102m at 1.00% Cu and 5.1g/t Ag in SPRD-21
- 8m at 3.21% Cu and 27.5g/t Ag in SPRD-24
- High-grade sulphide mantos continue across the central zone
- Near-surface oxide mineralisation extended westward
- Central drilling nearing completion ahead of a maiden resource estimate
Add us as a preferred source on Google
Pampa Medina delivers broad copper-silver intersections
Marimaca Copper Corp. (ASX:MC2; TSX:MARI) has produced another set of substantial copper-silver intersections from Pampa Medina in Chile, with the strongest result spanning 102 metres at 1.00% copper and 5.1 grams per tonne silver from 706 metres in hole SPRD-21. Within that interval, 14 metres graded 1.80% copper and 10.4g/t silver.


The result is notable less for a single spectacular spike than for the thickness and continuity of the mineralised zone. Drilled on 150-metre centres, SPRD-21 and nearby SPRD-18 both intersected stacked sulphide mantos within the central high-grade zone. SPRD-18 returned 68 metres at 1.13% copper and 8.7g/t silver, including 22 metres at 2.07% copper and 10.0g/t silver.
High-grade mantos remain open across the deposit
The latest drilling adds to a pattern already emerging at Pampa Medina. Earlier results had reported a 216-metre sulphide intersection, but links are restricted in this format. The current release itself says drilling continues to demonstrate continuity across the central sedimentary horizons, with mineralisation extending into basement units in SPRD-21.


Other holes supplied further evidence of grade persistence. SPRD-19 returned 34 metres at 1.36% copper and 6.6g/t silver at depth, including 8 metres at 2.63% copper and 17.8g/t silver. SPRD-24 intersected multiple mantos, including 18 metres at 1.69% copper and 13.3g/t silver, with an 8-metre subset grading 3.21% copper and 27.5g/t silver.
Oxide footprint expands while sulphides dominate at depth

The results are not confined to deep primary mineralisation. SPRD-26, drilled 300 metres west of the historical oxide footprint, returned 20 metres at 0.93% copper and 7.1g/t silver, followed by 84 metres at 0.62% copper and 3.2g/t silver. SPRD-18 also extended near-surface oxide mineralisation roughly 150 metres west.
That combination gives Pampa Medina two exploration stories: a deeper, higher-grade sulphide system hosted by stacked sedimentary mantos, and a broader oxide envelope nearer surface. The release describes the project as a manto-style copper deposit, with bornite, chalcopyrite, covellite and chalcocite identified below the oxide-primary transition.
Maiden resource estimate becomes the next technical test

Marimaca says drilling in the central high-grade zone is nearing completion and is intended to support a maiden resource estimate. Rigs are then moving north to Pampa Norte and west to Sierra Norte, where the company plans broader step-out drilling along targets identified by geophysical work.
The company’s exploration chief Sergio Rivera said the results were consistent with its geological model of multiple mineralised mantos within the target sedimentary sequence. That remains an exploration interpretation, rather than a resource statement. The company’s JORC disclosure also says the current data spacing is not yet sufficient to establish geological and grade continuity for an Inferred or Indicated resource.
Downhole widths still need geological conversion
All reported intersections are downhole lengths, with true widths estimated at approximately 80% of the reported intervals. That adjustment is important when assessing the eventual scale and geometry of the mineralised zones, particularly as the project moves from discovery drilling towards resource modelling.
For now, the most immediate catalysts are the completion of central-zone drilling, the maiden resource estimate and results from the northern and western step-outs. The open question is whether the strong grades and thick mantos continue with enough spacing and consistency to translate into a meaningful, classifiable resource.
Bottom Line?
The drilling is strengthening Pampa Medina’s geological case, but the maiden resource estimate must convert impressive downhole intersections into a defensible tonnage and grade model.
Questions in the middle?
- How much of the reported downhole thickness will translate into true resource widths?
- Can drilling in Pampa Norte and Sierra Norte demonstrate continuity beyond the central high-grade zone?
- What resource size and classification will emerge once the current drilling is incorporated into geological modelling?
Sources
1-
Pampa Medina Drilling Intersects 102m of 1.0% Cu, 5.1g/t Ag (opens in a new tab)Official market announcement. Marimaca Copper Corp · 20 Nov 2026 · marimaca.com