Nico’s Wingellina assays reveal broad nickel zones from surface
Nico Resources has reported thick, high-grade nickel intersections from the first 37 holes of a 94-hole infill program at Wingellina. The results support continuity across the South Domain, but the proposed resource upgrade still depends on pending assays, density analysis and further metallurgical work.
- 68 metres at 1.26% nickel from surface
- 54 metres at 1.60% nickel from surface
- 37 of 94 drill holes assayed to date
- 187.3Mt resource at 0.91% nickel
- Resource update and metallurgical testwork still pending
Add us as a preferred source on Google
First Wingellina assays confirm broad near-surface mineralisation
Nico Resources Limited (ASX:NC1) has returned a strong first batch of assays from its Wingellina nickel-cobalt project in Western Australia, with several intersections exceeding 50 metres and grading above 1% nickel. The standout results included 68 metres at 1.26% nickel and 0.07% cobalt from surface in WPRC0910, 66 metres at 1.31% nickel and 0.10% cobalt from four metres in WPRC0919, and 54 metres at 1.60% nickel and 0.08% cobalt from surface in WPRC0937.


The results cover 37 holes and 2,390 metres of the 94-hole, 6,430-metre reverse-circulation program completed across the South Domain in September and October. The company said the results confirmed the continuity and consistency of thick surface or near-surface mineralisation, broadly matching or improving on existing drilling. The program had been foreshadowed in Wingellina infill drilling, which targeted an upgrade of parts of the resource to Measured status.
Drilling targets a more confident resource model
Nico is using the infill campaign to convert Indicated Resources into Measured Resources, collect downhole density data and improve its understanding of local grade and geological variability. The existing 2024 Mineral Resource Estimate contains 187.3 million tonnes at 0.91% nickel and 0.06% cobalt, including 164.1 million tonnes classified as Indicated and 23.3 million tonnes as Inferred.


The early results are particularly relevant to the company’s description of Wingellina’s potential early production feed. Four highlighted limonite intersections ranged from 50 to 66 metres thick, with nickel grades between 1.13% and 1.31%. Nico also reported iron oxide levels of 50% to 62.5%, magnesium oxide of 0.9% to 1.8%, and calcium oxide of 0.2% to 0.6% in those examples. The company said this combination is considered suitable for assessment through pressure acid leach processing, although the current announcement does not establish future recoveries or economics.
Pending assays and testwork remain the next hurdles
Managing Director Jonathan Shellabear said the first batch provided “additional confidence” that quality goethitic ore could be available in the project’s early production years and encouraged the company that the resource-upgrade objective could be achieved. Those are company comments rather than a completed resource conclusion: assays remain outstanding for 57 holes, and the new data has not yet produced an updated estimate.


Nico’s next steps are to validate the remaining assays, assess the density data, update the resource where new drilling has been completed and examine local variability. It also plans additional metallurgical testwork to determine which material types can be blended, which may be treated as waste, and how factors such as recovery, acid consumption, hardness and grindability affect the eventual flowsheet. The intercepts are reported as downhole lengths, with true widths not yet determined, although the company expects them to broadly correspond because of the shallow, sub-horizontal laterite geometry.
Bottom Line?
The first assays strengthen the geological case for Wingellina, but the investment narrative now turns on whether the remaining holes convert that consistency into a larger Measured resource and a workable processing model.
Questions in the middle?
- Will the remaining 57 holes maintain the thickness and nickel grades reported in the first batch?
- How much of the current Indicated resource can the density and infill data convert to Measured status?
- Will further metallurgical testwork confirm recoveries and acid consumption suitable for a commercially viable flowsheet?
Sources
1-
Wingellina delivers thick high-grade Nickel-Cobalt results (opens in a new tab)Official market announcement. Nico Resources Limited · 17 Nov 2026 · nicoresources.com.au