Home › Mining › Legacy Minerals (ASX:LGM)

Legacy Minerals keeps 20% Fontenoy exposure as drilling expands copper-gold system

Mining By Maxwell Dee 4 min read

Earth AI has earned an 80% stake in Legacy Minerals’ Fontenoy project after completing A$3 million of exploration spending, leaving Legacy with a 20% interest carried through to production. A 24.5km drilling campaign has outlined more than 3km of copper-gold mineralisation at Meridian, with a maiden resource targeted for Q2 2027.

  • Earth AI moves to 80% of Fontenoy after satisfying the A$3 million Phase 2 spend
  • Legacy Minerals retains a 20% interest carried through to production
  • Meridian drilling outlines copper-gold mineralisation across more than 3km of strike
  • Polaris returns a standout 9m at 1.65g/t 3E platinum-palladium interval
  • Three rigs are operating, with a fourth planned for early 2027 and a maiden MRE targeted for Q2 2027

Earth AI earns 80% of Fontenoy

Legacy Minerals Holdings Limited (ASX:LGM) has secured a particularly valuable exploration arrangement at Fontenoy: it will retain 20% of the project while Earth AI funds its share of exploration, studies and development through to production. Earth AI has completed the A$3 million Phase 2 expenditure required under the farm-in agreement, taking its interest in exploration licence EL8995 to 80%.

Legacy’s share of future joint venture funding will be met by Earth AI and repaid only from Legacy’s share of production proceeds. That leaves Legacy exposed to the project’s next stages without having to fund the current drilling campaign, metallurgical work or mining studies. Earth AI remains operator and is funding the work.

Meridian drilling defines a growing copper-gold system

“Fontenoy Project drill collar plan showing all drill hole traces. Earth AI drill holes from this release highlighted with white halo (GDA2020, MGA Zone 55).”Caption and image © Legacy Minerals Holdings Limited. From “3km Copper-Gold System defined in Drilling Fontenoy”, 18 Nov 2026.

The geological headline is at Meridian, where 25 holes covering 13,625.6 metres have extended sulphide-hosted copper-gold mineralisation over more than 3km of strike, from near surface to at least 250 metres depth. Key intersections include 30 metres at 0.58% copper equivalent from 293 metres in EFO120D, 39 metres at 0.47% copper equivalent from 192 metres in EFO59D, and 24 metres at 0.61% copper equivalent from 21 metres in EFO217D.

Gold-rich zones add another dimension, including 3 metres at 2.52 grams per tonne gold and 12 metres at 0.82 grams per tonne gold in EFO159D. Historical drilling and geophysical interpretation point to potential mineralisation over as much as 8km, although that longer-scale interpretation remains an exploration hypothesis rather than a defined resource.

Polaris adds platinum and palladium exposure

At the separate Polaris prospect, 15 holes covering 10,311.9 metres returned further platinum-palladium results. The strongest reported interval was 9 metres at 1.65 grams per tonne 3E from 222 metres in EFO36D, including 1.31 grams per tonne palladium, 0.25 grams per tonne platinum and 0.08 grams per tonne gold. Another hole returned 10 metres at 0.48 grams per tonne 3E from 390 metres.

The company also reported preliminary cyanide-leach testing on five selected Meridian samples, with calculated cyanide-soluble gold fractions between 90.2% and 94.5%. That is encouraging laboratory evidence for those samples, but the company says further testing is needed to assess variability and confirm processing characteristics across the broader mineralised system.

Three rigs move Fontenoy towards a maiden resource

Earth AI now has three rigs operating at Fontenoy and plans to add a fourth in early 2027. The immediate objective is to close drilling gaps, test extensions and establish the geological and grade continuity needed for a maiden Mineral Resource Estimate targeted for Q2 2027. A 3D induced-polarisation survey is also planned for early 2027 to refine targets, while preliminary mining studies and additional metallurgical test work are underway.

The numbers still come with important qualifications. The reported widths are downhole lengths, not true widths, and the copper-equivalent figures rely on assumed copper and gold prices and proxy recovery rates rather than demonstrated metallurgical recoveries. The announcement reports exploration results only, not a Mineral Resource, and further work remains subject to planning, access, approvals and partner funding. The next meaningful test is whether the expanding drill pattern converts a promising system into continuous, mineable geometry.

Bottom Line?

Fontenoy now offers Legacy Minerals funded exposure to a larger copper-gold and PGE system, but the investment case still hinges on continuity, true widths, recoveries and delivery of the targeted Q2 2027 resource.

Questions in the middle?

  • Can the current infill and step-out drilling establish sufficient continuity for a maiden Mineral Resource Estimate?
  • Will broader metallurgical testing support the copper-equivalent assumptions and demonstrate recoveries across representative samples?
  • How much production value could Legacy’s carried 20% interest ultimately represent once development and repayment terms are tested against a defined resource?

Sources