Viking Mines has intersected visible scheelite in a 3.0-metre skarn interval at the South-West Extension of its Nevada tungsten project, around 500 metres beyond the Linka Main workings. The result expands the exploration story, but laboratory assays remain the test that matters.
- 3.0m of visible scheelite in LKRC0044
- Intercept lies approximately 500m south-west of Linka Main
- Six of 10 holes hit the target limestone-monzonite contact
- Visual abundance estimated at 0.1% to 0.3%, not a WO₃ grade
- Assays expected throughout December 2026
Scheelite appears beyond Linka Main
Viking Mines Limited (ASX:VKA) has found visible scheelite in a drillhole about 500 metres south-west of the historic Linka Main workings, the first such visual intercept the company has reported from its South-West Extension target in Nevada.
Hole LKRC0044 returned a 3.0-metre downhole interval of skarn, also known as tactite, from 56.4 metres. Viking estimated the visible scheelite abundance at between 0.1% and 0.3% under shortwave ultraviolet light. That figure is a visual estimate of mineral presence, not a tungsten oxide assay grade, and the true width of the mineralisation is not yet known.
Six holes reached the mineralised contact
The geological setting is the more important part of the result. The skarn sits at a limestone-monzonite contact, the same type of contact that hosts tungsten mineralisation at Linka Main. Six of the 10 holes drilled at the South-West Extension intersected that target contact, although only LKRC0044 has so far produced visible scheelite.
The target is concealed beneath younger Bates Mountain volcanic cover and includes an interpreted contact extending for about 800 metres. Viking’s earlier visible scheelite drilling results at Linka Main showed the value of visual logging as an exploration signal, but those observations also remained subject to laboratory confirmation.
December assays will set the grade
All samples from the maiden programme, including LKRC0044, have been delivered to the laboratory, with assay results expected throughout December 2026. Viking also plans to report visual observations from the remaining Linka Main holes once geological logging and data compilation are complete.
The company has classified the South-West Extension as a priority follow-up target and intends to seek Bureau of Land Management approval for additional drill sites. It also plans to update the three-dimensional geological model and reassess mineralised intervals using an ore-grade method with an XRF finish once the assays arrive. Until then, the result supports the geological interpretation but does not establish an economic zone, a mineral resource or a significant discovery.
Bottom Line?
The exploration footprint has widened, but December assays must convert a fluorescent visual signal into measured tungsten grades and meaningful continuity.
Questions in the middle?
- Will laboratory assays confirm tungsten grades consistent with the mineralisation seen at Linka Main?
- Does visible scheelite extend beyond LKRC0044 along the interpreted 800-metre contact?
- How much additional drilling will Viking require before the South-West Extension can be incorporated into a broader project model?